Double Glazed Windows and Doors Double Brick

It is critical that you measure your old window opening properly and accurately. Pvc windows are custom-built and can't be returned if the size ordered was inaccurate. This is why for all replacement windows and doors and some new constructions, our trained technicians will take their own measurements before manufacture. Most windows and doors are manufactured to +/-2 mm accuracy so ideally you should get the closest fit possible.

We recommend the installation and glazing of Window Factory Double Glazed Windows and Doors be carried out by qualified technicians (such as window installer and glazier) or builders. However, we have had many enquiries from DIY enthusiasts for supply only. We are happy to provide Double Glazed Windows and Doors on a supply only basis, but feel that for some of our clients, the installation work performed by themselves or independent trades people has compromised the quality of our windows and doors somewhat. For instance, in the event of a large gap between the wall and window, which is not covered or filled, there will be a decrease to the noise insulation and energy efficiency of the window or door.

Please note that we will not be responsible for incorrect installation if we did not install your windows and doors, and we suggest that you contact the responsible party who performed the installation work. We have been very successful at fixing poor installation of Double Glazed Windows and Doors - even those supplied by our competitors, but a fee is payable for this service, which depends on the complexity of the job and the quantity of items involved. We also offer a consultation service for builders if they are unfamiliar with Pvc windows.

The errors of judgement of some clients have led us to the creation of avoid-a-DIY-disaster installation tips. Please note that this information intended to be used as suggestions on what to look out for, based on our experience in correcting many problem installations, rather than a step-by-step guide to installing the Double Glazed Windows or Doors. Every installation may have unforeseen difficulties ranging from the weather to architectural challenges which may require an experts knowledge and experience to resolve, and although we took care in providing accurate information, please don't take complete reliance on it.

Tools Required:

• Gloves, Goggles
• Tape Measure, Spirit Level, Pencil
• Electric screwdriver, Nail Gun (may be required)
• Hand Drill, with 3, 3.5 or 4mm drill bits
• Screws see below for sizes
• Any type of Saw (to cut an aluminium angle)
• Expanding foam
• Window Packers - 1, 3, 7, 12mm

Before starting it may be prudent to first check the size, style and position against order. The Double Glazed Window may be perfectly installed, but if it is upside-down or meant for another room - the plan is compromised!

As uPVC Windows are not designed to be loadbearing, a lintel may be required above the window. If you are unsure, please consult a qualified fitter/surveyor. The new window should be approximately 10 mm smaller in height and width than the brick opening. Clear around the site of window, removing curtains/blinds/ornaments etc

Removal of Existing Windows and Doors

Prepare the immediate site by covering with durable dustsheets inside and out. Using screwdriver/nail bar remove all opening sashes. To remove glass in remaining window fixed lights, carefully crack glass with the aid of a screwdriver/punch and light hammer.

Always start at the top corner from inside the window, remove cracked shards and deposit into plastic bin. With the aid of a Stanley knife on inside of window, break plaster seal around periphery of window frame. Using crosscut saw, cut through the remaining vertical (mullion) and horizontal (transom) frame members and remove. Paying attention to minimise damage to plaster, brickwork and damp proof membrane cut through the outer frame jambs head and cill of the window frame.

With careful application of the nail bar, it should now be possible to lever the framework away from the plaster line with minimum disturbance. Remove any projecting cement accumulations with your masonry chisel and clean away any debris around the opening.

Fitting New Double Glazed Windows and Doors

Cill (where required): Position the cill profile onto the brickwork, such that the up stand is snug against the plaster line of the jambs (it may be necessary to trim the 'horns' to fit around the brickwork. Using the plastic packers, level the cill with approximately 5mm clearance between it and the brickwork. Secure the cill to the brickwork using the 8 x 100 mm fixing bolts positioned approximately 150 mm from each end and at 600 mm centres thereafter. Check for level and do not over tighten the fixing bolts. Run a bead of silicone along the back edge of the cill up stand. Using silicone or superglue, secure the end caps into position. They may need trimming to size if the cill horns have been cut around the brickwork.

Remove all glazing beads from the window frame, marking them accordingly to ensure they can be replaced into the original position. Offer the new window into position, with the base snug against the cill up stand, ensuring a tight seal into the bead of silicone. Clean off any excess silicone, which might occur. With spirit level, ensure the new window is positioned vertically and where appropriate hard up against the plaster line.

Wedge the window into position using the plastic packers provided. Do not bend the framework by over packing.

Open the vents of the window to enable access to the outer frame jambs. Using #8 x 40 posidrive screws, secure the bottom of the window to the cill, 150 mm from each internal corner and 600 mm centres thereafter. Secure the window jambs into the brickwork surround using 8 x 100 mm fixing bolts, again 150 mm from each corner and at +/- 600 mm centres thereafter.

In all cases ensure that the screw heads are not standing proud as this may interfere with the glass positioning. It is not advisable to attempt bolt fixing in the head of the window, as this may permanently damage the structural lintel of your window, the best solution for fixing the head is to use expanding foam. Close and lock all opening sashes, check for square ness within the outer frame.

Glazing of New Double Glazed Windows and Doors

Prior to moving the glass sealed units into the approximate aperture, it is necessary to position 25 x 100 x 15 glazing bridges into the frame recess. A dab of silicone will secure the packer in place in preparation for the next step. Position a 28 x 100 x 5 glazing packer onto the bottom glazing bridges. In the case of side hung sashes also glue or silicone secure an additional 28 x 100 x 5 glazing packer onto the glazing bridge opposite the hinge side. Locate the appropriate glass sealed unit into the aperture, resting squarely on the glazing packers, ensuring the glass is central within the opening. Push the glass back into the rebate as far as it will go without using undue pressure.

Using hand pressure only, position additional 2 mm glass packers to square up where necessary. Gently unlock and open the sashes to check that no binding occurs within the locking system and no movement occurs between the glass and frame, minor glass packer adjustments may be necessary to achieve perfect squareness. Clip back the pre marked glazing beads into the original position in the following order first - top, second - bottom, then sides. Carefully gun a bead of silicone between the outside masonry and window frame periphery, wiping off any excess. Similarly, gun a thin bead of acrylic between the inside plaster and window from the periphery.

Glazing also requires use of additional tools comprised of:

• Glass suction cups/ vacuum cups
• Rubber or plastic hammer
• Glass/ Glazing packers
• Silicon or plastic glue

Final Step of installation for Double Glazed Windows and Doors

Remove all protective tape from the faces of the window frame, clean where necessary with warm soapy water. When the window is installed, check its operation (unless fixed panel). You should not have to use force to open and close the window, and it should be airtight when closed. The sash should fit into the frame and there should be no gaps between frame and sash and frame and wall when closed. If the window or door looks crooked it has not been correctly installed. To check for operation, open the sash a few times and check if the operation is smooth and comfortable.

Installation of Double Glazed Windows in new homes or buildings is usually performed by the builder and his team, however, we are prepared to quote and provide an installation service if required. Installation fee is calculated on a per item basis and depends on the size and quantity of the items. The installation quote ordinarily includes glazing, but we can also provide a quote for installation excluding glazing, or a glazing only installation - we are flexible and understand that client circumstances vary.   Supplementary advice on double glazed new construction

Installation of replacement double glazed windows and doors or for new constructions includes removal but not disposal of existing windows, and includes glazing, which involves fitting glass into the frame.
If you hired a builder to manage the installation, but they are unfamiliar with upvc, we provide consulting services to ensure the windows installation is trouble free.   For supplementary material on double glazed replacement click here

Installation of Secondary Double Glazed Windows and Doors involves installing the new Double Glazed Window behind the original window frame, which is retained, so the secondary window becomes adjacent to the existing window.
Installations of Secondary Double Glazed Windows usually take less time than replacement double glazed windows (depending on window size, shape and glazing) and without the inconvenience that can occur during window replacement such as delays on site because of architrave removal/replacement, other site works such as painting etc.   Greater detail on double glazed secondary can be found here

Awning windows have both federation and contemporary architecture applications. Our windows are more than just apertures for light and ventilation - they can be a major spectacle offering a connection to heaven and earth. With the right advice about placement and size, our windows can improve comfort, utilize daylight and natural ventilation for improvement in overall health and well being.   For a detailed discussion on the subject of double glazed clading click here

Awning windows have both federation and contemporary architecture applications. Our windows are more than just apertures for light and ventilation - they can be a major spectacle offering a connection to heaven and earth. With the right advice about placement and size, our windows can improve comfort, utilize daylight and natural ventilation for improvement in overall health and well being.   Read more on double glazed single brick

Many people have the impression that all silicone gels on the market are the same, but we have found that their properties and, therefore, suitability varies dramatically. Generally, the descriptions of silicone offer little information as to the correct grade and type for a given application, and because of performance variability, there is no one type of silicone sealant that should be used for everything. Using the incorrect silicone or improper use may cause joint failure, contamination of surfaces because of poor application, excessive movement in the sealed joint.   For supplementary material on double glazed sealing click here

The most important part of the installation procedure for double glazed windows and doors, comes before you even order your windows. It is critical that you measure your old window opening properly and accurately. Pvc double glazed windows and doors are custom-built and can't be returned if the size ordered was inaccurate. This is why for all replacement windows and doors and some new constructions, our trained technicians will take their own measurements before manufacture. All of our double glazed windows and doors are manufactured to a high accuracy, so ideally you should get the closest fit possible.   Get all the facts on double glazed measuring your window

When design and utility are a priority, our cutting edge technology is sure to impress! For exceptional thermal and acoustic performance coupled with trouble free maintenance and ingenious design, this Door will exceed your expectations. The inward swinging Tilt and Turn Double Glazed Door, operates in the same way as the Tilt and Turn Double Glezed Window, and is built with the same care and precision that any window and door deserves. Special high quality hardware allow a single handle to operate all three functions: multiple security locking points for safety when locked, special hinges allowing the window to tilt inside for gentle air flow, and of course, the fully opening 'turn' function for maximum air flow and ventilation.   Greater detail on double glazed tilt & turn door can be found here

Double Glazed Awning Windows allow the window sash to swing outward rather than inward or up and down, so they can be located in may places around the home and easily arranged next to other window types. The awning window is the ideal window type for homes in the temperate climate zone, or homes that are positioned to take advantage of natural ventilation or breeze. Double Glazed Awning windows are made with compression and weather seal and provide higher air-tightness, energy-efficiency and acoustic insulation than other window types such as sliding and double-hung windows. Double Glazed Awning windows have a variety of applications due to their versatility and durability, and are particularly attractive option for contemporary homes because our Awning windows are manufactured locally to an indisputably imposing standard, impressing even the most discerning clientele.   Get the answers on your questions on double glazed awning window on this page

The Double Glazed Stacker Door has two or more (upto 6) panels, with one panel sliding past another, and all of the panels resting or being 'stacked' on one or two sides. They are a great alternative to Bifold Double Glazed Doors, when the client prefers the sliding style over the Bifold, or when space is at a premium, since with Stacker or Sliding Double Glazed Doors you need not worry about furniture placement or possible exterior obstacles. These doors feature ease of operation and maintenance, a universally appealing design that will complement any modern home.   Extra information about double glazed stacker door can be found here

Casement windows are an excellent choice for consumers concerned with acoustic, thermal and safety performance. The difference is obvious at a glance - the frame and sash look sturdy and substantial when compared to ordinary aluminium and wooden windows. You can have a beautifull home, but if you install inexpensive windows, the strucure of the home can feel cheaply built.   Read more on double glazed casement window

Embrace the beauty and sophistication of our Bifold Double Glazed Door carefully crafted with uncompromising expertise and unsurpassed quality The Double Glazed Doors are the ideal choice for the aspiring or an expert entertainer, offering an awe inspiring effect of an unobstructed opening onto a pool deck, garden, private beach, bushland or conservatory. The superior performance features are maintained in this style, offering acoustic insulation of upto 40 dB, with excellent energy efficiency rating measured by a u-value of 1.8, all while being corrosion resistant and environmentally friendly.   Extra information about double glazed bifold door can be found here

Nothing can maximise cross ventilation without crating a draft like Bay Windows. They are more than just a period feature - when strategically placed they can replace air conditioning and provide a lovely feature for your home. They also make the room feel more spacious and appear larger, so they have been known to increase the value of a property. Typically, the bay windows are very large, even covering almost the entire distance from floor to ceiling. The effect of prolific natural light and stunning outdoor views from any angle in the room can be filtered or softened with window treatments.   For more information double glazed bay window

The Composite Door is gaining in popularity with great speed for clients wanting noise insulation, strength, durability and security. All our Composite Doors contain a solid interior, which is made with reinforced materials, allowing our clients to gain increased security over even a solid wooden door, and will no doubt keep the insurance provider pleased. Composite doors are extremely strong, so they don't buckle, dent or warp, because they are designed to look better and provide more security for a longer period, than wooden or glass alternatives, yet they are very price competitive. The surface contains a glass reinforced polymer material and will not fade or lose colour. Additional feature includes advanced properties that shield from the weather, to ensure you have value for money in a door that lasts for decades, not just a few years.   More info on double glazed composite door

A meticulously controlled work process allows increased speed and economies of scale advantage in production and assembly. The design elements in the classic Side Hinged Double Glazed windows are sometimes subdued, but fundamentally enriching - aesthetically and through improved comfort. The classic design allows to emerge important elements such as a strong sense of mass, structural legibility and strength with clear proportional relationships between solid and void. Side Hinged windows are similar to Casement windows, but open out and provide the highest possible acoustic and thermal insulation. Side Hinged windows are uncomplicated and cost-efficient, and when combined with our double glazed units, and offer exceptional improvements in performance when compared against ordinary aluminium or wooden windows. With architect's help, the Side Hinged Double Glazed windows will no doubt encourage inhabitants or users to gain architectural delight from their serendipitous journeys throughout the home.   Get all the facts on double glazed side hinged window

Our Double Glazed Doors are more than just apertures for light and ventilation - they can be a major spectacle offering a connection to heaven and earth. With the right advice about placement and size, our Double Glazed Tilt and Slide Doors can improve comfort, utilize daylight and natural ventilation for improvement in overall health and well being. Window Factory Tilt and Slide Doors are the most innovative and attractive deck/ garden or balcony doors available. Not only do they boast the tilt option of other popular styles, but the Tilt and Slide Doors were also designed to maintain our reputation for high performance.   Great suggestions and more on double glazed tilt & slide door can be found here

Self sufficient and allowing for maximum natural ventilation, Double Glazed Stacker Windows slide and fold effortlessly demonstrating the refined taste of an intelligent consumer. Double Glazed Stacker Windows can create a vast amount of space along with an inviting contemporary character, and re-create a glass wall effect because they are not constrained to the same limitations of casement, awning and tilt & turn windows where the openings are restricted. The Double Glazed Stacker Window has two or more (upto six) panels, with one panel sliding past another, and all of the panels resting or being 'stacked' on one or two sides. They are a great alternative to Bifold Double Glazed Windows, when the client prefers the sliding style over the Bifold, or when space is at a premium, since with Stacker or Sliding Double Glazed Windows you need not worry about furniture placement or possible exterior obstacles. These windows feature ease of operation and maintenance, and a universally appealing design that will complement any modern home.   For a detailed discussion on the subject of double glazed stacker window click here

The total cost of delivery is directly related to the sizes and number of double glazing items in your order. If any of your double glazed windows or doors exceed a certain level in either height or width, we must use a bigger truck, which will raise the cost of delivery, even if you have only a single double glzing item. The first delivery level is 4m wide; the second delivery level is 6m wide. Of course, we always stack the items in a most efficient way to save space.   To obtain additional information on double glazed sizes and dimentions

Also known as tempered glass, it is a type of safety glass that has increased strength and will usually shatter in small, square pieces when broken. It is used when strength, thermal resistance and safety are important considerations. At home you are likely to find toughened glass in the shower and sliding glass patio doors. For commercial structures, it is used in unframed assemblies such as frameless doors, structurally loaded applications and where there is a danger of human impact. Toughened glass is typically four to six times the strength of annealed glass.   Get the answers on your questions on double glazed toughened glass on this page

Double Glazed Windows and Doors' focus is to keep the costs down - and this is transferred to the client in form of lower prices. Our staff are constantly maintaining and improving our processes for maximum automation and efficiency to maintain leadership and set high standards in the double glazing industry. In order to compete on price, Double Glazed Windows and Doors have created a lean business, and due to almost complete automation using high tech machinery, a considerably better class and value double-glazed product. Continued on the double glazed factory page.   Continued on the double glazed factory page

For windows and doors that do more than just open and close, but actually work for you to reduce your household or office energy bill by utilizing an energy efficient profile system and double glazing. Convenient and comfortable in many ways, they are an essential part of insulating your home or office, for a more sustainable living experience. A standard aluminium sliding window can add 40% heating/ cooling loss in the home. Would you purchase an appliance that can only ever operate at a maximum 60% capacity? But this is essentially what you are doing when your home is poorly insulated! The same high performance extends to acoustic insulation, with a potential reduction of 45dB in our casement, awning, tilt&turn and bifold range. The high-tech weather seal in combination with fusion welding of frames and sashes make the windows completely air and water tight - they have been tested to withstand even cyclone strength winds!   Examine all the facts on double glazed high performance page

or Double Glazing is described as two or more lites of glass spaced apart and hermetically sealed to form a single glazed unit with an air gap between each lite. As the name suggests, the most important function of and IGU is to improve the thermal performance of glass when used in architectural applications. It is common to find two panel of glass and they are therefore also referred to as double glazing units. Triple glazing units are rare but serve their owners well in very cold climates. Insulated glazing may be framed in a sash or frame. IGU made of glass is called insulated glass.   Continued on the double glazed igunit glass page

Ordinary tinted glass is popular because it reduces heat gain and carbon emmissions, although it also marginally reduces visible light transmission. High Performance or Low-e tinted glass or spectrally selective tinted glass reduces solar heat gain to below that of ordinary bronze/ gray tint but has a visible transmittance closer to clear glass. The tint has little effect on the U-factor but reduces solar gain considerably, which can reduce the need for air conditioning in the summer. Tinted glass is useful in controlling glare - especially for those windows facing east or north east. Return the sunlight not glare into your home.   Additional information on double glazed tinted glass can be found at this location

We don't share the vision of our competitors, for our product to be manufactured in China or India, and are committed to all round excellence in quality and service to our clients. We are disappointed that many consumers are tempted by the seemingly bargain price not realizing that the economy in cost is directly related to the quality not only of primary material but also of components. In our experience, advanced manufacturing techniques in precision and speed for improved automation and the use of intelligent, experienced and passionate people can provide long term and sustainable productivity improvements that lead to cost efficiency and price competitiveness. We are price competitive without compromising on quality because we are a lean, efficient and innovative organization that doesn't engage in opportunistic overcharging, and genuinely grateful customers and associates that would otherwise have not been able to afford such comfort and style reward us with a lot of return business!   Read more on double glazed manufactured locally

Rehau double glazed window and door systems are enhanced by a large range of ancillary profiles including sills, and angled head drips, square baypoles and couplers as well as frame extensions, ensuring a fully compatible and integrated solution and an easier fit for any double glazing applications. The features built into the double glazed window and door profiles will not only guarantee many years of high performance, but each system has been engineered to ensure maximum efficiency, thus providing you with considerable energy savings and a total peace of mind.   For supplementary material on double glazed supplementary click here

Purchasing new windows and doors can be a big investment. The advantage of our Double Glazed UPVC Windows and Doors is that the purchase becomes an investment that is value added and can pay for itself in just a few years by acting as an insulator and reducing heating and cooling costs which save you money every month. Over the life of a poorly insulated window, the cost of the heat loss is much greater than the purchase cost, especially with the rising energy prices. In addition, improving the curb appeal of your home with designer high performance windows can increase the property resale value. How valuable are your family`s comfort and peace of mind? You can be confident that our Double Glazed Windows and Doors will help you meet and exceed the requirements of the BASIX legislation, add a little luxury without adversely affecting the environment! Don`t throw money away on cheap imitations - our windows boast u-values of 1.8 that is three times better than a typical aluminium sliding window with a u-value of 5.8.   Extra information about double glazed energy efficiency can be found here

Double Glazed Windows and Doors are committed to protecting our staff, customers, associates and public from risk and injury associated with working with windows and glass products. Most accidents are preventable, and we provide extensive training for our staff to deal with various situations and armed with knowledge and experience, we are confident they are well prepared for uncertainty. Double Glazed Windows and Doors maintain an effective OH&S plan that not only complies with the law, but also is continuously improved as we try to uphold the highest level of safety that reaches beyond minimum legal requirements.   To obtain additional information on double glazed safety

After the double glazed windows are delivered to your home or the construction site, ideally they should be installed as soon as possible, to minimise the risk of accidental damage. However, we understand that this may not be practical if there are other renovation or construction work being completed - in this case, it is best to store the double glazed window/ door frames and glass separately and in an area with limited access, so that the upvc window frames and insulated glass units experience the least movement possible.   A complete guide for double glazed handling and storage can be found here

Purchasing upvc double glazing is not simply a cosmetic improvement, it is about technical advancement, high performance, safety and security, so by having various of our vinyl double glazed products tested in a laboratory to Australian Standards and the building regulations, ensures your double glazed windows comply with the minimum expected from any manufacturer in Australia. In fact, the double glazed window products that were tested have been found to outperform the minimum levels, and sometimes even exceed these levels several times over. Supplementary advice on double glazed test reports.   Examine all the facts on double glazed test reports page

The all-round customer-friendly double glazed products offer an enhanced appearance as well as superior fabrication ease and performance. Together, the advanced form and function of sliding window system ensure lasting high quality, simple installation and satisfied customers. The Rehau Euroslide Design can be used to make a wide variety of upvc sliding double glazed windows and doors. Three main categories of pvcu window and door design can be fabricated.   Get the answers on your questions on double glazed euroslide staker on this page